Manufacturing

Zero Valve Breakdowns in two years

Stadco, an automotive stamping specialist with over 30 years of experience, operates high-performance hydraulic presses around the clock. The facility was plagued by weekly breakdowns caused by oil degradation inherent in industrial-sized presses. Extreme pressure bursts damaged the fluid, creating varnish deposits that clogged sensitive valves worth approximately £20,000 each. Two previous attempts to use alternative filtration systems had failed, and high contamination levels meant that even oil top-ups were ineffective. 

View Case Study
Zero Valve Breakdowns in 2 Years | Stadco Case Study

3,000 Ton Hydraulic Press: Overcurrent Shutdowns Eliminated

A 3,000 ton compression moulding press kept tripping on overcurrent faults. Its tight valve clearances were sensitive to fine particles, varnish and moisture. After 35 days of Delta-Xero offline filtration, ≥4 µm particles fell 97%, MPC 75% and the shutdowns stopped.

View Case Study
Large hydraulic compression moulding press in a manufacturing plant

Hydraulic Hot Forge: 80% Lower Valve Costs After Varnish Removal

A US hot forge's 190,000 litre hydraulic system suffered weekly varnish-related valve sticking. Delta-Xero offline filtration removed over 454 kg of varnish, sludge and particulate, cut MPC from 62.1 to 17.0 and reduced valve costs by 80%.

View Case Study
Glowing hot steel billet under a hydraulic forging press

Sheet Steel Slitter: Why a Hydraulic Oil Change Wasn’t Enough

A sheet steel slitter was recontaminated soon after a hydraulic oil change, because carbon dust and varnish stayed in the system. Delta-Xero offline filtration cut particles by over 99% and MPC by 81% in about a month.

View Case Study
Coils of sheet steel stacked in a steel processing plant

Injection Moulding Press: 93.5% Less Varnish in 17 Days

An automotive injection moulding machine developed chatter, sticking valves and slower cycles after three years on the same AW 46 oil. Delta-Xero offline filtration cut MPC from 70.8 to 4.6 in 17 days, ending the chatter without an oil change.

View Case Study
Injection moulding machine with mould tool and hydraulic lines

Steel Uncoiler Gearbox: Industrial Gear Oil Viscosity Stabilised

A rolled steel uncoiling gearbox ran on heavily oxidised EP 320 gear oil with unstable viscosity and high varnish. A 27-day Delta-Xero trial stabilised viscosity, cut ≥6 µm and ≥14 µm particles by 99% and led to a plant-wide rollout.

View Case Study
Close-up of worn industrial gearbox gears coated in oil

Housewares Injection Moulding: 99% Fewer Particles in 55 Days

A US housewares manufacturer's injection moulding system ran on severely oxidised AW 46 oil with high MPC, water and particles. In a 55-day independent trial, Delta-Xero filtration cut ≥4 µm particles from 183,677 to 222 per mL and MPC from 63.4 to 1.6.

View Case Study
Coloured plastic pellets pouring into an injection moulding hopper
contact us

Ready to transform your oil management?