Glowing hot steel billet under a hydraulic forging press

Hydraulic Hot Forge: 80% Lower Valve Costs After Varnish Removal

Forging press hydraulic oil: over 454 kg of varnish and sludge removed and 80% lower valve costs.

Glowing hot steel billet under a hydraulic forging press
case study

How continuous filtration ended varnish-related valve sticking on a hot forge

The Challenge

A large hydraulic system serving a hot forging operation in the United States had suffered persistent varnish for an extended period. The 50,000 US gal (approximately 189,000 litre) reservoir held zinc-free AW 68 hydraulic oil running above 66°C (150°F). The high temperature accelerated oxidation, frequent leakage and top-ups added variability, and existing varnish deposits acted as oxidation catalysts.

The maintenance team faced severe varnish-related valve sticking, weekly valve interventions, rising rebuild and replacement costs, extra labour and avoidable downtime. Consultants and earlier varnish mitigation approaches had not achieved lasting control.

The Solution

A Delta-Xero offline filtration system was connected to the reservoir in a continuous kidney loop. Its submicron cellulose media targeted varnish precursors, sludge, particulate and moisture without stripping the lubricant’s additive package.

Treatment continued for nine months so contamination released from internal surfaces could be captured progressively. MPC and Total Acid Number were monitored alongside the mass of contamination removed and the site’s maintenance outcomes.

The Results

  • Varnish control: MPC fell from 62.1 to 17.0 over nine months, a 73% reduction.

  • Contamination removed: more than 1,000 lb (about 454 kg) of varnish, sludge and particulate was captured.

  • Lower maintenance cost: valve rebuild and replacement costs fell by 80%.

  • Reliability: uptime improved, with fewer varnish-related valve interventions.

  • Stable oil: MPC and Total Acid Number stayed stable after treatment.

Case study supplied by Kimbro. Download the full hydraulic hot forge case study for the complete data.

Related Case Studies

About us - Delta-xero

Reduced iron levels and lower PQ index

A 1.5 MW wind turbine gearbox showed persistent contamination risk despite routine oil analysis. To understand the true internal condition of the gearbox, debris captured inside an offline filtration unit was analysed after extended in-service operation. Standard oil samples alone were not showing the full extent of varnish, wear debris, and moisture present within the system.  

View Case Study
Off-shore Oil and Gas: Case Study 2

The Additive Myth Debunked

A long-term independent study was carried out by POLARIS Laboratories Europe to assess whether installing Delta-Xero filtration on a landfill gas engine would negatively affect lubricant condition, additive performance, or expected oil drain intervals.

View Case Study
contact us

Ready to transform your oil management?