MARINE & OFFSHORE

Navigating harsh environments with total fluid reliability. From deep-sea propulsion to offshore platforms, Delta-Xero ensures your oils stay clean, dry, and IACS-compliant, protecting your assets and the environment. 

 Book a Call
IACS-compliant hydraulic filtration for tug and OSV steering gear to remove salt particles and moisture

01

Marine Propulsion & Steering Hydraulics - Tugs, Pilot Boats, OSVs & Commercial Vessels

APPLICATION

  • Steering gear and rudder hydraulic control systems

  • Azimuth thruster and CPP (controllable pitch propeller) systems

  • Bow thruster and stabiliser hydraulics

  • Dynamic positioning (DP) hydraulic control circuits

THE PROBLEM

  • Saltwater ingress and thermal cycling cause pump cavitation and valve stiction

  • Contaminated steering hydraulics create dangerous control failures in busy shipping lanes

  • IACS compliance demands frequent oil changes that increase vessel off-hire time

  • Sub-micron salt particles cause invisible but progressive internal corrosion

DELTA-XERO SOLVES THIS BY

  • Remove salt particles and moisture down to 0.1 micron from steering and propulsion circuits

  • Extend hydraulic and lube oil life by 3–4× even in the world's most corrosive environments

  • Ensure total vessel manoeuvrability and IACS compliance at all times

  • Dramatically reduce manual maintenance burden and oil disposal frequency

 Get in Touch
Delta-Xero fluid conditioning for offshore winches and deck cranes to prevent varnish buildup during idle periods

02

Offshore Winches & Deck Handling Systems - Anchor Winches, A-Frames, Cranes & Deck Machinery

APPLICATION

  • Offshore anchor-handling winches and mooring systems

  • Subsea A-frame and crane hydraulic drives

  • Offshore platform and vessel deck crane slewing systems

  • Heavy-lift and pipe-lay equipment hydraulics

THE PROBLEM

  • Long idle periods in extreme humidity cause oil oxidation and moisture absorption

  • Varnish buildup in standby systems leads to component jamming during critical lifts

  • Sub-micron varnish is undetectable by standard inspection but causes the most damage

DELTA-XERO SOLVES THIS BY

  • Maintain peak oil condition 24/7 during idle periods to prevent varnish and corrosion

  • Enable condition-based servicing with confidence in standby system readiness

  • Guarantee flawless deck equipment operation when called into action for critical lifts

  • Shift from time-based to health-based maintenance to reduce waste and cost

 Get in Touch
Marine diesel fuel polishing system reducing contamination by 99.8% to guarantee platform emergency power

03

Offshore Power Generation & Engine Lubrication - Platform Gensets, Marine Diesel Engines & Fuel Systems

APPLICATION

  • Main diesel engine lubrication and cooling circuits

  • Offshore platform standby and emergency generator fuel tanks

  • Marine auxiliary engine and generator sets

  • HVO, kerosene, and multi-fuel storage and polishing systems

THE PROBLEM

  • Thermal cycling during intermittent use creates varnish and sludge in lubricants

  • Microbial diesel bug in storage tanks causes injector clogging and failure to start

  • Poor fuel quality leads to increased CO2, NOx, and SO2 emissions

  • Emergency power loss at sea or on a platform creates a severe safety hazard

DELTA-XERO SOLVES THIS BY

  • Reduce diesel contamination by 99.8% and water content by 99.5% in storage

  • Keep engine oils in pristine condition to eliminate varnish and sludge buildup

  • Achieve 7–33% reduction in CO2 and >50% reduction in NOx at full load

  • Guarantee fail-safe emergency power availability across all offshore operations

 Get in Touch
contact us

Ready to transform your oil management?