Power Generation

87% Cleaner Oil

A power generation facility operating a GT26 gas turbine experienced persistent lubrication issues caused by severe varnish formation. Oil analysis showed critically high MPC values, indicating a high risk of varnish-related failures, reduced heat exchanger efficiency, filter blockages, accelerated component wear, and compromised turbine reliability. Previous filtration approaches failed to control varnish levels or stabilise oil condition.  

View Case Study
GT26 Gas Turbine Case Study | Delta-Xero

Rolled out across all three turbines

A large natural-gas-fired combined-cycle power station operating multiple Siemens gas turbines faced rising operational risk due to oil degradation and varnish buildup. Oil analysis showed valve issues, filter blockages, and elevated varnish levels within the turbine loop systems, increasing the risk of unplanned downtime and threatening contractual energy supply commitments. Existing filtration systems failed to fully control contamination.  

View Case Study
Removing Metallic Debris and Varnish from Wind Turbines

Transformer Oil: Restored to IEC Compliance in Two Passes

Aged, service-withdrawn mineral transformer oil failed BS 148 and IEC 60422 on water and breakdown voltage. A Delta-Xero DX1001T restored it in two filtration passes: BDV up from 14 kV to 70 kV and water down 92%, verified by a UKAS-accredited lab.

View Case Study
Electrical substation transformers with high-voltage bushings at sunset

CAN2 Termik Turbine: 21.9 kg Removed From EHC Fluid

The CAN2 Termik thermal power station's turbine EHC system held aged Shell DR46 fluid with heavy varnish and carbon deposits from microdieseling. A six-cartridge Delta-Xero system removed an estimated 21.9 kg of contamination in five months.

View Case Study
Steam turbine hall inside a thermal power station

Steam Turbine Oil: 82% Less Varnish Potential in 528 Hours

A steam turbine at a major Greek power plant had rising particles, water and varnish risk in its lubricating oil. On Hexagon Europe's recommendation, a Delta-Xero DX1000 cut I-MPC from 26.6 to 4.8 and >4 µm particles by 79% in 528 hours.

View Case Study
Open steam turbine rotor with blades exposed during maintenance
contact us

Ready to transform your oil management?