Open steam turbine rotor with blades exposed during maintenance

Steam Turbine Oil: 82% Less Varnish Potential in 528 Hours

Steam turbine oil filtration: I-MPC down 82%, >4 µm particles down 79% and water to almost 0% in 528 hours.

Open steam turbine rotor with blades exposed during maintenance
case study

How continuous offline filtration controlled varnish, particles and water in steam turbine oil

The Challenge

A steam turbine at a major Greek power plant had elevated particulate, water and varnish-related contamination in its lubricating oil. Cleanliness was ISO 20/18/14 and MPC results showed rising varnish potential in the lubrication circuit.

Steam turbines run under sustained heat and pressure, so contamination increases friction, wear and maintenance risk. The plant needed continuous treatment that could restore oil cleanliness without interrupting turbine operation.

The Solution

Hexagon Europe recommended a Delta-Xero DX1000 Series offline filtration system, connected in a continuous kidney loop. Its patented submicron cellulose media targeted fine particulate, varnish-related contamination and free or emulsified water without stripping the lubricant's additive package.

Oil analysis tracked ISO cleanliness, particle concentration, water and MPC across 528 operating hours.

The Results

  • Varnish potential down 82%: I-MPC from 26.6 to 4.8.

  • Particles >4 µm down 79%.

  • Cleanliness improved three codes: ISO 20/18/14 to 17/15/11.

  • Water reduced to almost 0%.

  • Reliability: cleaner oil supports turbine efficiency, component life and uptime.

Download the full steam turbine oil case study for the complete results.

Related Case Studies

About us - Delta-xero

Reduced iron levels and lower PQ index

A 1.5 MW wind turbine gearbox showed persistent contamination risk despite routine oil analysis. To understand the true internal condition of the gearbox, debris captured inside an offline filtration unit was analysed after extended in-service operation. Standard oil samples alone were not showing the full extent of varnish, wear debris, and moisture present within the system.  

View Case Study
Off-shore Oil and Gas: Case Study 2

The Additive Myth Debunked

A long-term independent study was carried out by POLARIS Laboratories Europe to assess whether installing Delta-Xero filtration on a landfill gas engine would negatively affect lubricant condition, additive performance, or expected oil drain intervals.

View Case Study
contact us

Ready to transform your oil management?