Fishing trawler sailing through a Norwegian fjord

MS Østerbris Fishing Vessel: 99% Water Removed from Hydraulic Oil

Marine hydraulic oil on MS Østerbris: 99.1% water removal in one pass and ISO 19/19/17 to 15/13/10.

Fishing trawler sailing through a Norwegian fjord
case study

How one compact unit cleaned the hydraulic oil behind a fishing vessel’s deck machinery

The Challenge

MS Østerbris is a commercial fishing vessel based in Bergen, Norway. Its 4,000 litre main hydraulic power unit (HPU) supplies the winches, cranes and fish pumps. An initial inspection found extremely high water contamination at 4,909 ppm, together with heavy fibre and particle contamination and a cleanliness code of 19/19/17. Effective contamination removal was needed to protect essential deck machinery and hydraulic performance.

The Solution

A Delta-Xero DX1002T offline filtration unit circulated the HPU oil through submicron cellulose media, targeting water, fibres and fine particulate in the main hydraulic circuit.

Inlet and outlet samples were compared at start-up to show single-pass performance. Reservoir samples taken on 29 January and 27 March 2021 were assessed with Millipore patch inspection, water measurement and cleanliness codes.

The Results

  • 99.1% single-pass water removal: water fell from 4,909 ppm at the inlet to 43 ppm at the outlet.

  • Reservoir recovery: water in the main HPU fell by 98.2% to 87.2 ppm.

  • Cleaner oil: the cleanliness code improved from 19/19/17 to 15/13/10, with 99.2% of particle contamination removed.

  • Visual evidence: the treated oil and membrane patch were visibly cleaner than the initial sample.

  • Compact solution: one DX1002T treated the whole 4,000 litre HPU.

Parameter

Before

After

Water (main HPU)

4,909.4 ppm

87.2 ppm

Cleanliness code

19/19/17

15/13/10

Patch test

Heavy deposit

Visibly cleaner

Download the full MS Østerbris marine hydraulic oil case study for the patch evidence.

Related Case Studies

About us - Delta-xero

Reduced iron levels and lower PQ index

A 1.5 MW wind turbine gearbox showed persistent contamination risk despite routine oil analysis. To understand the true internal condition of the gearbox, debris captured inside an offline filtration unit was analysed after extended in-service operation. Standard oil samples alone were not showing the full extent of varnish, wear debris, and moisture present within the system.  

View Case Study
Off-shore Oil and Gas: Case Study 2

The Additive Myth Debunked

A long-term independent study was carried out by POLARIS Laboratories Europe to assess whether installing Delta-Xero filtration on a landfill gas engine would negatively affect lubricant condition, additive performance, or expected oil drain intervals.

View Case Study
contact us

Ready to transform your oil management?